Ga door naar hoofdinhoud

Wijzigingen in stap #4

Bewerken voor Brett Hartt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Lift the black plastic faceplate out of the optical bay enclosure.
[* [* icon_note] You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
[* [* icon_note] You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.
[* black] Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.
[* black] The enclosure should now look like the third picture in this step.