Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Tristan Novak

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] To remove the circuit board, locate the screws at the center of the panel containing the circuit board.
[*
black] Using the U-shapedSP2.6 u-shaped screw driver in one hand, open loosen and remove the screw. With the other hand, use forceps or your finger to holdboth center screws. Hold the back part of the screw to removewith the two center screwsmetal tweezers.
[* black] To remove the circuit board, locate the screws at the center of the panel containing the circuit board.
[*
black] Using the U-shapedSP2.6 u-shaped screw driver in one hand, open loosen and remove the screw. With the other hand, use forceps or your finger to holdboth center screws. Hold the back part of the screw to removewith the two center screwsmetal tweezers.