Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Voor
Na
Ongewijzigd

Stap regels

-[* black] After the adhesive around the egdes is loosened, pull up the back cover with your suction handle.
-[* black] Use a tweezer to pull out two black straps that are attached to two pieces of adhesive right on the battery.
+[* icon_note] There are two adhesive strips in the center of the phone connecting the rear case to the battery, you'll need to remove them to open the phone.
+[* black] When the edges of the cover are free from adhesive, tilt it to allow access to the battery tabs.
+[* black] Use tweezers to pull the two black adhesive strips out of the phone but don't pull just yet.