Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor matthew

Bewerking goedgekeurd door Walter Galan

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Flip the device over and work a spudgerplastic opening tool around the base of the front case cover until it loosens.
[* black] Flip the device over and work a spudgerplastic opening tool around the base of the front case cover until it loosens.
[* black] CAUTION: Do not fully remove the case cover until the next step has been completed or you may damage the ribbon cable. To be safe, only lift the cover high enough to fit a spudger in the gap.