Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Mario T

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Remove the seven 5mm screws using the Phillips number 0#0 screwdriver.
[* black] Detach the wire mesh tape connection the logic board to the LCD screen with your hands/prying toolthe sharp end of the spudger.
[* red] Remove the seven 5mm screws using the Phillips number 0#0 screwdriver.
[* black] Detach the wire mesh tape connection the logic board to the LCD screen with your hands/prying toolthe sharp end of the spudger.
[* black] Remove the logic board with your hands.