Ga door naar hoofdinhoud

Wijzigingen in deze stap

Bewerken voor Mario T

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* blackyellow] To remove the power/input board first remove the three wire connections connecting this board to the other boards.
[* blackred] Next remove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* blackyellow] To remove the power/input board first remove the three wire connections connecting this board to the other boards.
[* blackred] Next remove the four 5mm screws using the Phillips number 0. Note that one of the screws is hidden below the black tape.
[* black] Finally remove the board from device.

Afbeelding 1

Oude versie

Nieuwe versie