Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor iRobot

Bewerking goedgekeurd door Andrea

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Turn the entire device over, so that the underside of the device is facing upward.
[* black] With the underside of the device facing up, locate the 11mm screwsscrew found in each far corner of the device. Remove the single 11mm screw from each of the four corners, using the Phillips #0 screwdriver.
[* black] With the underside of the device facing up, locate the 11mm screwsscrew found in each far corner of the device. Remove the single 11mm screw from each of the four corners, using the Phillips #0 screwdriver.