Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #2

Bewerking door Dominik Schnabelrauch

Bewerking goedgekeurd door Dominik Schnabelrauch

Voor
Na
Ongewijzigd

Stap regels

[* black] At this pointicon_note] For better accessibility and an easier workflow we start usinguse a bike stand. It makes it easier to reach all the bike parts, you need to work on.
[* black]
Loosen the screw on the upper left side of your shapeshifter with a 4mm allen key.
[* black] Now takeUse a flat tool like one of our metal spudgersspudger and leverage the cap of the left side of the rocker.
[* black] Mount a 10mm socket wrench to your Canyon torque wrench and remove the 10mm screw nut which appearedis placed under the cap.
[* black] At this pointicon_note] For better accessibility and an easier workflow we start usinguse a bike stand. It makes it easier to reach all the bike parts, you need to work on.
[* black]
Loosen the screw on the upper left side of your shapeshifter with a 4mm allen key.
[* black] Now takeUse a flat tool like one of our metal spudgersspudger and leverage the cap of the left side of the rocker.
[* black] Mount a 10mm socket wrench to your Canyon torque wrench and remove the 10mm screw nut which appearedis placed under the cap.