Ga door naar hoofdinhoud

Wijzigingen in stap #19

Bewerken voor Phillip Takahashi

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Connect the SATA cable intoto the SSD.
[* black] Connect the SATA cable intoto the SSD.
[* black] Peel the backing off of the double sided tape.
[* black] Carefully set the SSD into iMACthe iMac optical bay as farclose to the lower left and downcorner as possible.
[* icon_note] TryDo not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with it'sthe SSD's placement, firmly press down along its edges to ensure full adhesion.
[* black] Re-assemble the iMac in reverse order.
[*
icon_note] When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.
[* black] Carefully set the SSD into iMACthe iMac optical bay as farclose to the lower left and downcorner as possible.
[* icon_note] TryDo not to repeatedly stick and un-stick the tape, as the adhesive will become weaker.
[* black] Once you are happy with it'sthe SSD's placement, firmly press down along its edges to ensure full adhesion.
[* black] Re-assemble the iMac in reverse order.
[*
icon_note] When re-installing the optical drive, the SATA cable will be sandwiched between the foam padding and the optical drive.