Ga door naar hoofdinhoud

Wijzigingen in stap #18

Bewerken voor Walter Galan

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Peel the backing off one side of the double sided tape.
[* black] Press the exposed adhesive side of the double sided tape to the corner of the SDD.
[*[* icon_note] The double sided tape must go on the blue labeled side or the cables will not fit into their sockets.
[* icon_note

[* icon_reminder
] Be sure not to cover the SATA connectors with the double sided tape.
[*[* icon_note] The double sided tape must go on the blue labeled side or the cables will not fit into their sockets.
[* icon_note

[* icon_reminder
] Be sure not to cover the SATA connectors with the double sided tape.
[* black] Repeat the above process for the remaining 3 corners.