Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart


Stap regels

[* black] Use the flat end of a spudger to pry up the right side of the ear speaker cover assembly.
[* icon_caution] Do not try to pry the assembly all the way off, as it is still connected at two points.
[* red] Turn the spudger around and use the pointed side to detach the two clips securing the top of the assembly.
[* black] Once the clips are detached, lift the cover assembly up from the device.
-[* black] When re-assembling, make sure to lift the tab and place the ribbon cable under the other two cables. this ribbon connects first when re-assembling.