Ga door naar hoofdinhoud

Wijzigingen aan stap #2

Bewerking door Daniel

Bewerking geweigerd door David Hodson

Voor
Na
Ongewijzigd

Stap regels

[* black] Use the flat end of a spudger to pry up the right side of the ear speaker cover assembly.
[* icon_caution] Do not try to pry the assembly all the way off, as it is still connected at two points.
-[* red] Turn the spudger around and use the pointed side to detach the two clips securing the top of the assembly.
+[* red] Turn the spudger around and use the pointed side to detach the three clips securing the top of the assembly. It is difficult so be very careful and cautious. It is easier if you have access the other side without a glass screen on.
[* black] Once the clips are detached, lift the cover assembly up from the device.

Afbeelding 2

Oude versie

Nieuwe versie