Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Jake Devincenzi

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Slide the pointed end of the spudger into the slot under the upper right corner of the ear speaker and pry gently upwards.
[* icon_caution] Be careful during this step, as the upper portion of the speaker can easily detach from the lower portion, causing the coil inside to unwind. This does not matter too much if you are installing a new speaker, but it doesn't hurt to keep the old one intactintact, so be sure to pry the entire assembly up.
[* icon_caution] Be careful during this step, as the upper portion of the speaker can easily detach from the lower portion, causing the coil inside to unwind. This does not matter too much if you are installing a new speaker, but it doesn't hurt to keep the old one intactintact, so be sure to pry the entire assembly up.
[* black] Lift the ear speaker up and out of the device.