Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Jake Devincenzi

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Use the flat end of a spudger to pry up the right side of the ear speaker cover assembly.
[* icon_caution] Do not try to pry the assembly all the way off, as it is still connected at two points.
[* blackred] Turn the spudger around and use the pointed side to detach the two clips securing the top of the assembly.
[* black] Once the clips are detached, you should be able to lift the cover assembly up and out offrom the device.
[* blackred] Turn the spudger around and use the pointed side to detach the two clips securing the top of the assembly.
[* black] Once the clips are detached, you should be able to lift the cover assembly up and out offrom the device.

Afbeelding 2

Oude versie

Nieuwe versie