Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #5

Bewerking door Marshall in Baltimore

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Now install the replacement PMV cable.
[* black] Each button has on its underside it two tiny black plastic pegs which fit into holes in the metal frames, to ensure the proper fit. Make sure to line these up properly when attaching the cable to the metal frames. The reassembled cable should look as shown in the figures.
[* black] Each button has on its underside it two tiny black plastic pegs which fit into holes in the metal frames, to ensure the proper fit. Make sure to line these up properly when attaching the cable to the metal frames. The reassembled cable should look as shown in the figures.
[* black] Install the new cable working from the power switch back towards the mute and volume switches and then to the cable connector, snaking the PMV cable along its complicated path.
[* black] The replacement part should have adhesive patches to hold the cable in place.
[* black] Attaching the cable connector is tricky; it may be helpful to use a plastic opening tool to push it gently until it snaps into place.