Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Wijzigingen aan stap #3

Bewerking door Marshall in Baltimore

Wachtend op goedkeuring


Stap regels

[* black] Remove the two 2.5 mm Phillips screws from the back of the power switch mechanism.
[* black] You can then push in on the power switch (on the exterior of the iPad) to push the mechanism's internal metal plate loose.
[* black] You can then peel the PMV cable free from the iPad's case, working backwards from the power switch towards the mute switch.
[* black] Lift free the small metal frame piece supporting the mute and volume switches.
[* black] Note: The photo shows the mute and volume switch frame being removed before the rear camera and power switch; this is possible but it's probably best to start with the power switch first.

Afbeelding 1

Geen vorige afbeelding