Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #8

Bewerking door Wallace Karraker

Bewerking geweigerd door David Hodson

Voor
Na
Ongewijzigd

Stap regels

[* black] Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone.
[* black] Remove the logic board.
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the logic board ('''not''' the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues.
[* black] There is a small rubber edge protector that protects the video and digitizer cables. It is held on by friction, confirm it is in place during reassembly.

Afbeelding 2

Geen vorige afbeelding

Toegevoegd