Ga door naar hoofdinhoud

Wijzigingen in stap #8

Bewerken voor Christiaan Bye

Wachtend op goedkeuring


Stap regels

[* black] Carefully lift the logic board from the end closest to the speaker enclosure and slide it away from the top edge of the iPhone.
[* black] Remove the logic board.
[* icon_note] Apon reassembly, be aware not to trap the tiny power button connector under the logic board (as shown in the second image).
[* icon_caution] Before reassembly, be sure to clean all metal-to-metal contact points on the logic board ('''not''' the mating halves of connectors) with a de-greaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to cause grounding issues.

Afbeelding 2

Geen vorige afbeelding