Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Matt Wiens

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] Remove the five cables near the top of the logic board in the following order:
[* blackred] Headphone jack/volume button cable
[* blackorange] Power button cable
[* blackyellow] Front facing camera cable
[* blackgreen] Digitizer cable
[* blackblue] Display data cable
[* blackred] Headphone jack/volume button cable
[* blackorange] Power button cable
[* blackyellow] Front facing camera cable
[* blackgreen] Digitizer cable
[* blackblue] Display data cable
[* black] To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.
[* icon_caution] Be careful not to break any of the small and delicate surface mount components as you disconnect the cables.

Afbeelding 1

Oude versie

Nieuwe versie