Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #9

Bewerking door Brett Hartt

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulled through the slot before pressing the display assemblycut into the outer case. OtherwiseOtherwise, the digitizer cable wontwill not reach to its socket on the logic board and you risk to brick the digitizer by introducing a sharp bend to the cableboard.
[* icon_caution] When reinstalling the display assembly, make sure the digitizer and display data cable are completely pulled through the slot before pressing the display assemblycut into the outer case. OtherwiseOtherwise, the digitizer cable wontwill not reach to its socket on the logic board and you risk to brick the digitizer by introducing a sharp bend to the cableboard.
[* icon_note] Remember to switch the home button from your old display to the new display (most cases this is not provided)
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].