Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #9

Bewerking door Tobias Beer

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Use the edge of a plastic opening tool to gently pry up the display assembly around its perimeter.
[* black] Remove the display assembly from the iPhone.
[* icon_caution] When reinstalling the display assembly, bemake sure the digitizer and display data cablescable are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will causeOtherwise the digitizer cable to notwont reach to its socket on the logic boardboard and you risk to brick the digitizer by introducing a sharp bend to the cable.
[* icon_caution] When reinstalling the display assembly, bemake sure the digitizer and display data cablescable are completely pulled through the slot cut into the outer case before pressing the display assembly down into the outer case. Failure to do so will causeOtherwise the digitizer cable to notwont reach to its socket on the logic boardboard and you risk to brick the digitizer by introducing a sharp bend to the cable.
[* icon_note] Remember to switch the home button from your old display to the new display (most cases this is not provided)
[* icon_reminder] After reassembly, protect your new display from any scratches by installing a new [product|IF182-025|screen protector].