Ga door naar hoofdinhoud

Wijzigingen in stap #3

Bewerken voor Whitney

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* black] The back panel must be removed in order to proceed. Slide the cover so that it is fully extended.
[* black] The arrows in the picture indicate two small holes located at the top of the device. Insert a paper clip or a tack simultaneously into each of these holes and moderately push downward.
[* black] The springs will give as pressure is exerted. Once you feel this take place, pull down the cover with the paper clip/tack while continuing to push downward. This will release the back cover.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd