Ga door naar hoofdinhoud

Wijzigingen in stap #6

Bewerken voor Andrew Bookholt

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] The 3.5 mm Phillips screw indicated below with a red circle may be absent in some models.
[*
black] Remove the following 57 screws and 32 nuts from the heat sink:
[* icon_note] The 3.5 mm Phillips screw indicated below with a red circle may be absent in some models.
[*
black] Remove the following 57 screws and 32 nuts from the heat sink:
[* red] One 3.5 mm Phillips from the lower left corner of the heat sink.
[* orange] ThreeFive 6 mm Phillips from around the fanfan and at the center of the heat sink.
[* orange] ThreeFive 6 mm Phillips from around the fanfan and at the center of the heat sink.
[* yellow] One 7.5 mm Phillips at the top right corner of the heat sink.
[* green] One 4 mm nut from the side of the heat sink.
[* blue]
Two 4 mm screw nuts with attached springs from either side of the heat sink.
[* green] One 4 mm nut from the side of the heat sink.
[* blue]
Two 4 mm screw nuts with attached springs from either side of the heat sink.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd