Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen in deze stap

Bewerking door John Schutz

Bewerking geweigerd door Geoff Wacker

Voor
Na
Ongewijzigd

Stap regels

[* black] Use a plastic opening tool to pull the pressure contact from underneath the battery connector.
[* icon_caution] When reinstalling the pressure contact, be sure to clean it with a degreaser such as windex or isopropyl alcohol. The oils on your fingers have the potential to create wireless interference.
[* icon_caution] Take notice of the position of the pressure contact on the upper screw of the battery connector. This clip is hold only by the upper screw. When reinstalling, it must be aligned so the gold contact point will press against the back cover.