Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Rick Marshall

Bewerking goedgekeurd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screwscrew. Pay attention to the small grounding clip (visible if you magnify the first image).
[* orange] One 1.5 mm Phillips screwscrew. Pay attention to the small grounding clip (visible if you magnify the first image).
[* black] Use a plastic opening tool to gently detach the battery connector from the device.