Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Walter Galan

Bewerking goedgekeurd door Walter Galan

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following screws securing the battery connector to the logic board:
[* red] One 1.7 mm Phillips screw
[* orange] One 1.5 mm Phillips screw. Pay attention to the small grounding clip (visible if you magnify the first image).
[* orange] One 1.5 mm Phillips screw. Pay attention to the small grounding clip (visible if you magnify the first image).
[* black] Use a plastic opening tool to gently detach the battery connector from the device.
[* icon_caution] Pay attention to the pressure contact underneath the top screw of the battery connector. This may come loose while prying the battery connector from its socket.

Afbeelding 1

Oude versie

Nieuwe versie