Ga door naar hoofdinhoud

Wijzigingen aan stap #4

Bewerking door mayer

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Support the display with one hand while removing the following screws:
- [* red] One 9.5 mm silver T6 Torx screw with threads on only part of the shaft on the inside of the display hinges.
+ [* red] One 9.5 mm silver T6 Torx screw with threads on only 3 mm of the shaft on the inside of the display hinges.
[* orange] One 9.5 mm silver T6 Torx screw with threads on the entire shaft on the outside of the left hinge.
- [* yellow] One T6 Torx screw securing the iSight cable ground loop to the fan.
+ [* yellow] One 9.2 mm full thread T6 Torx screw securing the iSight cable ground loop to the fan.