Ga door naar hoofdinhoud

Wijzigingen aan stap #8

Bewerking door Walter Galan

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

-[* black] Support the display with one hand while removing the following 3 screws:
- [* red] Two 9.5 mm silver T6 Torx screws with threads on only part of the shaft on the inside of the display hinges.
+[* black] Support the display with one hand while removing the following screw:
+ [* red] One 9.5 mm silver T6 Torx screw with threads on only part of the shaft on the inside of the display hinges.
[* orange] One 9.5 mm silver T6 Torx screw with threads on the entire shaft on the outside of the left hinge.
[* black] Grasp the display assembly on both sides and lift it up and out of the computer.