Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Mackenzie Keane

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] Using a PhillipsRemove the 5.81 mm Phillip #2 Screwdriver, remove the screws holding the casing together. There are two sets of two screws located on the left and right sides of the casing.
[* red] Using a PhillipsRemove the 5.81 mm Phillip #2 Screwdriver, remove the screws holding the casing together. There are two sets of two screws located on the left and right sides of the casing.
[* icon_caution] There are still wires attaching the front and back metal casing. Lift the back of the metal casing off of the front. Do not use force.