Ga door naar hoofdinhoud

Wijzigingen in stap #1

Bewerken voor Phil Jones

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* red] RemoveWith the pairmonitor facing down, remove the two 5.81 mm Phillip #2 screws on the right side of the metal casing.
[* orange] With the monitor still facing down, remove the two
5.81 mm Phillip #2 screws on the left and right sides holdingside of the casing togethercasing.
[* icon_caution] ThereDo attempt to pull apart the casing. There are still wires attachingholding the front and back metal casing. Lift the back of the metal casing off of the front. Do not use force to avoid damaging the wirestogether.
[* red] RemoveWith the pairmonitor facing down, remove the two 5.81 mm Phillip #2 screws on the right side of the metal casing.
[* orange] With the monitor still facing down, remove the two
5.81 mm Phillip #2 screws on the left and right sides holdingside of the casing togethercasing.
[* icon_caution] ThereDo attempt to pull apart the casing. There are still wires attachingholding the front and back metal casing. Lift the back of the metal casing off of the front. Do not use force to avoid damaging the wirestogether.

Afbeelding 2

Oude versie

Nieuwe versie