Ga door naar hoofdinhoud

Wijzigingen aan stap #11

Bewerking door Johnathan Marroquin

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Rotate the printer 90 degrees counter clockwise.
-[* red] Remove the cable connecting the ink cartridge carriage to the logic board.
-[* icon_caution] Pull strait up to free the cable from the logic board. Do not twist or wiggle the cable as doing so can damage it.
+[* red] Remove the cable connecting the ink cartridge carriage to the main circuit board.
+[* icon_caution] Pull strait up to free the cable from the main circuit board. Do not twist or wiggle the cable as doing so can damage it.
[* icon_note] You may need to lift the carriage up with one hand in order to reach the cable with the free hand as shown.