Ga door naar hoofdinhoud

Wijzigingen aan stap #11

Bewerking door Jim

Wachtend op goedkeuring


Stap regels

-[* black] Rotate the printer 90 degrees clockwise.
+[* black] Rotate the printer 90 degrees counter clockwise.
[* red] Remove the cable connecting the ink cartridge carriage to the logic board.
[* icon_caution] Pull strait up to free the cable from the logic board. Do not twist or wiggle the cable as doing so can damage it.
[* icon_note] You may need to lift the carriage up with one hand in order to reach the cable with the free hand as shown.