Ga door naar hoofdinhoud

Wijzigingen aan stap #11

Bewerking door Jim

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Rotate the printer 90 degrees clockwise.
[* red] Remove the cable connecting the ink cartridge carriage to the logic board.
+[* icon_caution] Pull strait up to free the cable from the logic board. Do not twist or wiggle the cable as doing so can damage it.
+[* violet] have a second picture of the cable pulled out. Move picture of wires to new step.
[* blue] Remove the wires connecting the drive motor to the logic board.