Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #8

Bewerking door Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Voor
Na
Ongewijzigd

Stap regels

[* black] Remove the following 15 screws:
[* red] One 4.4 mm black Phillips screw to the right of the ram slot.
[* orange] Eight 4.7 mm silver T6 Torx screws securing the logic board to the lower case.
[* icon_note] If you leave the five uppermost orange screws in place, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained, and you won't need to reapply thermal paste as instructed two steps below.
[* yellow] One 6.2 mm black T6 Torx screw on the right side of the left fan.
[* green] Five 9.4 mm silver T6 Torx screws securing the left and right fans.
[* icon_note] If you leave the upper 5 orange screws on, the heatsink/pipes come out effortlessly, still mounted onto the main board. That way its thermal connection is retained.