Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #10

Bewerking door Andrew Optimus Goldheart

Bewerking goedgekeurd door Andrew Optimus Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Lift up the left side of the logic board and disconnect the gray and black power cable from the bottom of the board.
[* icon_note] Pull the power cable connector parallel to the face of the logic board.
[* black] Grasp the logic board at the left side and at the thin section, and rotate the logic board out of the lower case.
[* icon_note] To properly reassemble your MacBook Pro, you'll have to clean off and replace the old thermal compound from the chips on the back of the logic board. Use our [guide|744|Applying Thermal Paste Guide] to prepare the processor and heat sink surfaces.