Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Wijzigingen aan stap #3

Bewerking door davidroady

Bewerking geweigerd door Jake Devincenzi

Voor
Na
Ongewijzigd

Stap regels

[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.