Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #10

Bewerking door Pierre-Alain Parfond

Bewerking goedgekeurd door Carsten Frauenheim

Voor
Na
Ongewijzigd

Stap regels

[* black] Apply flux to the positive contact of the bastterybattery on the PCB (Incidental finding is a SMD fuse F1 on this PCB)
[* black] Apply flux to the positive contact of the bastterybattery on the PCB (Incidental finding is a SMD fuse F1 on this PCB)
[* black] Using desoldering braid unsolder the positive contact from the PCB.
[* black] Apply some gentle pressure with a small tool to remove the battery.
[* icon_caution] The battery should remove easily. If it does not, double check the battery contacts on the PCB to ensure they are not still connected somewhere. Another going over with the soldering iron may be required to complete that task.