Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #8

Bewerking door oldturkey03

Bewerking goedgekeurd door oldturkey03

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert wisdom hereThere are three places that will have to be desoldered.
[* red] Positive battery contact
[* orange] Negative battery contact
[* violet] and a jumper
[* black] For the jumper the only thing required is to remove the solder between the pads.
[* black] Apply some flux to the jumper. The pliers will help to stabilize the PCB during soldering. any other means to hold it steady can be used
.
[* black] Insert wisdom hereThere are three places that will have to be desoldered.
[* red] Positive battery contact
[* orange] Negative battery contact
[* violet] and a jumper
[* black] For the jumper the only thing required is to remove the solder between the pads.
[* black] Apply some flux to the jumper. The pliers will help to stabilize the PCB during soldering. any other means to hold it steady can be used
.

Afbeelding 1

Oude versie

Nieuwe versie

Afbeelding 2

Oude versie

Nieuwe versie