Ga door naar hoofdinhoud

Wijzigingen in stap #2

Bewerken voor Joe M

Wachtend op goedkeuring

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] To open the Linksys WAP11, you will need a [product|IF145-028|small screwdriver] and a pair of [product|IF145-020|metal tweezers].
[* bluered] Use the tweezers to remove the two rubber boots on the front two legs. The easiest way to do this is to insert the tweezers into the hole in the face of the boot. Once you are hooked behind the boot, pull outwards.
[* blueviolet] This will reveal two small Phillips-head screws. Remove them.
[* bluered] Use the tweezers to remove the two rubber boots on the front two legs. The easiest way to do this is to insert the tweezers into the hole in the face of the boot. Once you are hooked behind the boot, pull outwards.
[* blueviolet] This will reveal two small Phillips-head screws. Remove them.

Afbeelding 2

Oude versie

Nieuwe versie