Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door derek

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] So you've decided to replace the network port on your Linksys WAP11? If you don't have the main circuit board in your handshands, you will want to follow our other guides:
[* black] So you've decided to replace the network port on your Linksys WAP11? If you don't have the main circuit board in your handshands, you will want to follow our other guides:
[* black] [guide|6608]
[* black] [guide|6605]
[* black] [guide|6603] '''(optional)'''
[* black] forFor the replacement of the network portport, you will need solder, flux, a soldering iron, and either a solder sucker or solder wick. For a complete and easy to use soldering ironkit click [http://www.ifixit.com/Tools#0-Soldering+and+Wiring|here].
[* black] If you haven't soldered before, or are a bit rusty, it is recommended that you take a moment to refresh the basicsbasics.
[* black] [[soldering|Ifixit soldering guide]] '''Soldering and desoldering have the potential for harm, always wear propper eye protection and other personal protective equipment while performing either action!'''
[* black] forFor the replacement of the network portport, you will need solder, flux, a soldering iron, and either a solder sucker or solder wick. For a complete and easy to use soldering ironkit click [http://www.ifixit.com/Tools#0-Soldering+and+Wiring|here].
[* black] If you haven't soldered before, or are a bit rusty, it is recommended that you take a moment to refresh the basicsbasics.
[* black] [[soldering|Ifixit soldering guide]] '''Soldering and desoldering have the potential for harm, always wear propper eye protection and other personal protective equipment while performing either action!'''