Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door derek

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] So you've decided to replace the network port on your Linksys WAP11? If you don't have the main circuit board in your hands you will want to follow our other guides:
[* black] [guide|6608]
[* black] [guide|6605]
[* black] [guide|6603] '''(optional)'''
[* black] for the replacement of the network port you will need solder, flux, and a soldering iron.
[* black] If you haven't soldered before, or are a bit rusty, it is recommended that you take a moment to refresh the basics
[* black] [[soldering|Ifixit soldering guide]]