Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #1

Bewerking door Javier

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] For the replacement of the network port, you will need solder, a soldering iron, and either a solder sucker or solder wick. For a complete and easy to use soldering kit click [http://www.ifixit.com/Tools#0-Soldering+and+Wiring|here].
[* black] If you haven't soldered before, or are a bit rusty, it is recommended that you take a moment to refresh the basics.
[* black] [[soldering|Ifixit soldering guide]] '''Soldering and desoldering have the potential for harm, always wear propper eye protection and other personal protective equipment while performing either action!'''
[* black] Turn the main circuit board around and using a soldering iron and desoldering wick desolder the 12 pins that secure the port to the main board.

Afbeelding 1

Geen vorige afbeelding

Toegevoegd