Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #6

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Voor
Na
Ongewijzigd

Stap regels

[* black] Prepare an iOpener and lay it over the lower edge of the digitizer to loosen the adhesive holding the home button gasket in place.
[* black [* icon_note] Wait about two minutes before moving on to ensure the adhesive has adequate time to soften.
[* black] Flip the digitizer panel over and gently push the home button out of its slot in the front panel.
[* icon_caution] Push slowly and apply just enough pressure to slowly separate the gasket from the glass—if you push too hard the gasket will rip.
[* black [* icon_note] Wait about two minutes before moving on to ensure the adhesive has adequate time to soften.
[* black] Flip the digitizer panel over and gently push the home button out of its slot in the front panel.
[* icon_caution] Push slowly and apply just enough pressure to slowly separate the gasket from the glass—if you push too hard the gasket will rip.

Afbeelding 2

Geen vorige afbeelding

Toegevoegd

Afbeelding 3

Geen vorige afbeelding

Toegevoegd