Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #4

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Voor
Na
Ongewijzigd

Stap regels

[* black] Peel up the last of the tape holding the home button ribbon cable in place by inserting an opening pick between the cable and the digitizer.
[* black] Continue sliding the pick underneath the cable until it is wholly separated from the front panel
[* icon_caution] Do not attempt to remove the home button yet. Is is still held in place by a strongly adhered bracket and delicate gasket.