Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #20

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] HeatReheat an iOpener and lay it over the logic board on the rear case.
[* black] Wait a couple minutes for the adhesive to soften, then flip
backside of the iPad over and pivotnear the opening pickSIM slot for at the lower edge around the bottom left corner of the logic board.
[* icon_caution] Be very careful to not sever the battery connector with the pick. Hold the pick at an angle to the rear case and push the connector down to be safe
least two minutes.
[* black] HeatReheat an iOpener and lay it over the logic board on the rear case.
[* black] Wait a couple minutes for the adhesive to soften, then flip
backside of the iPad over and pivotnear the opening pickSIM slot for at the lower edge around the bottom left corner of the logic board.
[* icon_caution] Be very careful to not sever the battery connector with the pick. Hold the pick at an angle to the rear case and push the connector down to be safe
least two minutes.

Afbeelding 2

Verwijderd

Afbeelding 3

Verwijderd