Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #22

Bewerking door Sam Goldheart

Bewerking goedgekeurd door Sam Goldheart

Voor
Na
Ongewijzigd

Stap regels

[* black] Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board.
[*
black] Slide the plastic card upunder the sidelogic board, toward the top of the logic board to break upiPad, near the adhesive holding it in placecameras.
[* black] Once the opening pick has lifted a corner of the logic board, you can insert a plastic card under the board.
[*
black] Slide the plastic card upunder the sidelogic board, toward the top of the logic board to break upiPad, near the adhesive holding it in placecameras.
[* icon_note] If the logic board adhesive provides too much resistance, reheat your iOpener and lay it on the rear case to soften the glue.