Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Wijzigingen aan stap #22

Bewerking door Evan Noronha

Bewerking goedgekeurd door Evan Noronha

Voor
Na
Ongewijzigd

Stap regels

[* black] Insert wisdom hereSlide the plastic card up the side of the logic board to break up the adhesive holding it in place.
[* icon_note] If the logic board adhesive provides too much resistance, reheat your iOpener and lay it on the rear case to soften the glue
.
[* black] Insert wisdom hereSlide the plastic card up the side of the logic board to break up the adhesive holding it in place.
[* icon_note] If the logic board adhesive provides too much resistance, reheat your iOpener and lay it on the rear case to soften the glue
.