Ga door naar hoofdinhoud

Wijzigingen aan stap #5

Bewerking door Phillip Takahashi

Wachtend op goedkeuring

Voor
Na
Ongewijzigd

Stap regels

[* black] Allow the oil to drain until it slows to a drip.
-[* black] Replace the drain plug. Screw it in as far as possible by hand, then use the 17 mm socket, or box end wrench, to finish tightening it.
+[* black] Replace the drain plug. Screw it in as far as possible by hand, then use the 17 mm socket or box end wrench to finish tightening it.
[* icon_caution] Only tighten the drain plug until it is snug. Over-tightening the oil drain plug can strip the threads or crack the oil pan.
-[* black] Wipe off the area around the oil drain plug.
+[* black] Wipe off the area around the oil drain plug with a clean rag or towel.