Ga door naar hoofdinhoud

Wijzigingen in stap #12

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen


Stap regels

[* black] Gently lay the display in place over the iMac, and align it carefully.
[* icon_note] At this point it's a good idea to test your repair, in order to make sure your iMac works properly before you seal it back up. Follow the next several steps to temporarily reconnect the display cables and boot up your iMac prior to pulling the protective film off the adhesive strips.
[* black] If you've already tested your iMac and are ready to seal the display in place, skip to [step X].