Ga door naar hoofdinhoud

Wijzigingen in stap #17

Bewerken voor Jeff Suovanen

Bewerking goedgekeurd door Jeff Suovanen

Verwijderd
Toegevoegd
Ongewijzigd

Stap regels

[* icon_note] Once you've confirmed the iMac powers onicon_caution] Verify that your iMac is turned off and unplugged from power before you continue.
[* black] After confirming that your iMac
functions properly, disconnect the display cables and carefully lean the display forward.
[* black] Remove the film from the 4L and 4R strips first by reaching in from above and pulling the tabs straight up from the bottom edge of the display.
[* icon_note] Once you've confirmed the iMac powers onicon_caution] Verify that your iMac is turned off and unplugged from power before you continue.
[* black] After confirming that your iMac
functions properly, disconnect the display cables and carefully lean the display forward.
[* black] Remove the film from the 4L and 4R strips first by reaching in from above and pulling the tabs straight up from the bottom edge of the display.